Air Cooled Single Duct 1 AC Unit - MultiTherm

Home | About MultiTherm Coils | How to Order | Newsletters | Media/Advertising | Contact Us

Air Cooled-Grille Diffuser

Air Cooled-Single Duct

Air Cooled-Double Duct

Chilled Water-Grille Diffuser

DX-Grille Diffuser

Website Design by DDA

Notes

• CFM delivered on any single duct unit assumes an external static pressure of .05".

• CFM delivered on any double duct unit assumes an external static pressure of .10".

• Performance based on the following: 80°F DB/67°F WB entering air. 95°F ambient entering condenser air.

• FLA = Full load amps
MCA = Minimum circuit amps -(2) Separate power supplies required for heating and cooling in same unit.
MFS = Maximum fuse size

Air Cooled Single Duct 1 AC Unir Specifications

AC Series (Air Cooled)
Series	ACSD Single Duct
Nominal Tons	1.0
Model Number	ACSD-1
Total Cooling MBH (3)	12.4
Sensible Cooling MBH	8.4
Air Flow CFM	400
Fan Motor HP	1/4
Fan Speeds	3 SPD
Fan Motor Amps	2.0
Compressor Amps	8.3
Fan Motor HP	1/3
Fan Motor Amps	2.3
Air Flow CFM (Actual)	469(H)
Cooling Circuit FLA	12.6
Cooling Circuit MCA	14.6
Cooling Circuit MFS	20
Heating Circuit FLA	11
Heating Circuit MCA	20
Heating Circuit MFS	20
Weight (Approx. LBS.)	282

ACSD-1
Nominal CFM	400
Nominal Tons	1.0
Standard Horsepower	1/4

ACSD-1.5
Nominal CFM	600
Nominal Tons	1.5
Standard Horsepower	1/4

ACSD-2
Nominal CFM	800
Nominal Tons	2.0
Standard Horsepower	1/4

Info Request >>

Fill out a form for more information

Home | About MultiTherm Coils | How to Order | Newsletters | Media/Advertising | Sitemap | Contact Us
Coils (Replacement or New) | Heat Exchangers | Tube Bundles | Self Contained Ceiling A/C Unit "T-Bar Unit" | Coil Replacement Worksheet | Coil Selection Program